Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) vs Generac Guardian 10kW (7171)
Both units carry the same best-fuel running rating: 10,000 W. The Generac Guardian 10kW (7171) is the quieter of the two (61 dBA vs 67 dBA — though manufacturers measure noise at different loads and distances). Warranty favors the Briggs & Stratton PowerProtect 10kW with 200A ATS (040684): 6 years vs 5.
| Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) | Generac Guardian 10kW (7171) | |
|---|---|---|
| Type | home-standby | home-standby |
| Fuel | natural-gas, propane | natural-gas, propane |
| Running watts (gas / LP for standby) | 10000 W | 10000 W |
| Running watts (propane) | 10000 W | 10000 W |
| Running watts (natural gas) | 8000 W | 9000 W |
| Noise level | 67 dBA | 61 dBA |
| Output voltage | 120/240V | 120/240V |
| Automatic transfer switch included | Yes | No |
| Main-line circuit breaker | 50 A | 45 A |
| Start type | automatic | automatic |
| Engine | Briggs & Stratton Vanguard M35 | Generac G-Force 400 |
| Engine displacement | 570 cc | 460 cc |
| NG use at half load | 111 ft³/h | 101 ft³/h |
| Propane use at half load | 1.2 gal/h | 0.97 gal/h |
| Weight | 272 lb | 338 lb |
| Warranty | 6 yr | 5 yr |
Frequently asked questions
Which costs less to run, the Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) or the Generac Guardian 10kW (7171)?
Estimated fuel for 24 hours at about 50% load: $40 on natural gas for the Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) vs $36 on natural gas for the Generac Guardian 10kW (7171), at national average prices. These are spec-sheet-derived estimates — the assumptions are on the methodology page, and different fuels make this a cost comparison, not an efficiency ranking.
Where do these specifications come from?
Every record on BackupAtlas is hand-curated from manufacturer documentation and spec sheets, and each generator page links to its source document.