Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) vs Generac PowerPact 7.5kW (6998)

The Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) is the more powerful unit: 10,000 running watts against 7,500 — about 25% more capacity for the Briggs & Stratton PowerProtect 10kW with 200A ATS (040684). The Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) is the quieter of the two (67 dBA vs 69 dBA — though manufacturers measure noise at different loads and distances). Warranty favors the Briggs & Stratton PowerProtect 10kW with 200A ATS (040684): 6 years vs 3.

Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) Generac PowerPact 7.5kW (6998)
Type home-standby home-standby
Fuel natural-gas, propane natural-gas, propane
Running watts (gas / LP for standby) 10000 W 7500 W
Running watts (propane) 10000 W 7500 W
Running watts (natural gas) 8000 W 6000 W
Noise level 67 dBA 69 dBA
Output voltage 120/240V 120/240V
Automatic transfer switch included Yes Yes
Main-line circuit breaker 50 A 35 A
Start type automatic automatic
Engine Briggs & Stratton Vanguard M35
Engine displacement 570 cc 420 cc
NG use at half load 111 ft³/h 73 ft³/h
Propane use at half load 1.2 gal/h 0.87 gal/h
Weight 272 lb 280 lb
Warranty 6 yr 3 yr

Frequently asked questions

Which is more powerful, the Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) or the Generac PowerPact 7.5kW (6998)?

The Briggs & Stratton PowerProtect 10kW with 200A ATS (040684), at 10,000 running watts on its best fuel versus 7,500 W. Remember that dual-fuel and natural-gas ratings are lower than gasoline ratings — the comparison table shows the published per-fuel figures.

Which costs less to run, the Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) or the Generac PowerPact 7.5kW (6998)?

Estimated fuel for 24 hours at about 50% load: $40 on natural gas for the Briggs & Stratton PowerProtect 10kW with 200A ATS (040684) vs $26 on natural gas for the Generac PowerPact 7.5kW (6998), at national average prices. These are spec-sheet-derived estimates — the assumptions are on the methodology page, and different fuels make this a cost comparison, not an efficiency ranking.

Where do these specifications come from?

Every record on BackupAtlas is hand-curated from manufacturer documentation and spec sheets, and each generator page links to its source document.