Westinghouse WGen6000
Westinghouse WGen6000 is a portable generator from Westinghouse, rated 6,000 running watts with 7,500 starting watts on gasoline, measured at 72 dBA, with 120/240V output.
| Type | portable |
|---|---|
| Fuel | gasoline |
| Running watts (gas / LP for standby) | 6000 W |
|---|---|
| Starting watts (gas) | 7500 W |
| Noise level | 72 dBA |
|---|---|
| Fuel tank | 6.6 gal |
| Output voltage | 120/240V |
|---|---|
| Transfer-switch-ready outlet | 30 A |
| Start type | electric |
|---|
| Engine displacement | 420 cc |
|---|
| Weight | 174 lb |
|---|
What the numbers mean
- At 6,000 running watts on its best fuel, this unit covers a partial-home setup through a 30 A transfer switch or interlock: refrigerator, furnace, a well or sump pump, and lights, with load management for anything bigger.
- House hookup: pairs with a 30 A generator inlet ( L14-30) and a transfer switch or interlock installed by an electrician.
Compare the Westinghouse WGen6000
- Westinghouse WGen6000 vs Champion 7000W Dual Fuel (100155)
- Westinghouse WGen6000 vs Champion 7500W with 50A Outlet (100813)
- Westinghouse WGen6000 vs Champion 7500W Dual Fuel (100891)
- Westinghouse WGen6000 vs Champion 7500W Dual Fuel with CO Shield (201281)
- Westinghouse WGen6000 vs DuroMax XP5500EH Dual Fuel
- Westinghouse WGen6000 vs Firman H08051 Dual Fuel 8000W
- Westinghouse WGen6000 vs Firman T07571 Tri-Fuel 7500W
- Westinghouse WGen6000 vs Firman T08071 Tri-Fuel 8000W
Similar generators
- Generac GP6500 COsense ( 6,500 W running)
- Westinghouse WGen5300DFcv ( 5,300 W running)
- Westinghouse WGen5300s ( 5,300 W running)
- Champion 7000W Dual Fuel (100155) ( 7,000 W running)
- Predator 9000 (59206) ( 7,250 W running)
- Champion 7500W with 50A Outlet (100813) ( 7,500 W running)
Frequently asked questions
What can the Westinghouse WGen6000 run during an outage?
With 6,000 running watts on its best fuel, the Westinghouse WGen6000 covers a partial-home setup through a 30 A transfer switch or interlock: refrigerator, furnace, a well or sump pump, and lights, with load management for anything bigger. Add up your actual loads with a sizing worksheet — the bands here are rough guidance, not a load calculation.
What inlet does the Westinghouse WGen6000 need to power a house?
A 30 A generator inlet (an L14-30 connection) wired to a transfer switch or interlock kit — an electrician's job that normally requires a permit. Never backfeed through a dryer or wall outlet.
Sources
- westinghouse.com (retrieved 2026-07-23)
- www.lowes.com (retrieved 2026-07-24)